![]() |
|
| HOME » CONTENTS » PRIVACY STATEMENT » FEEDBACK » COPYRIGHT INFO | |
|
NAVIGATE
|
Clamping Up the Assemblies for the Wine Barrel |
|
A typical assembly, clamped up. Note the iron angles bolted to the frame for the purpose of clamping the assemblies to it.
Once all the assemblies are installed on the barrel frame, it is time to fit and join them. Notice the small blocks on the edge of the top assembly. These allow the units to be bolted to each other with long 6/15 bolts.
Once all the assemblies are in place, it looks something like this…
|
| Far Star Inc. Contact Information |
|||
|---|---|---|---|
|
|
|
|
Copyright © 2007, 2008, 2009, 2010 Far Star Inc. Last modified: June 3, 2010 |
|||