	Home Building Construction Services
	More than 30 years of building construction experience! We work hard to bring our clients complete satisfaction!
HOME » CONTENTS » PRIVACY STATEMENT » FEEDBACK » COPYRIGHT INFO

NAVIGATE

Closing in on the Finished Wine Barrel

Picture of the end panels being sanded after cutting.

After cutting, the panels have to be sanded prior to installation…how do you do it? The old fashion way…by hand! (With the help of a power sander, of course!)

O.K., before we can install these puppies, we have to disassemble the barrel from the temporary bending jig. Here goes!…

Picture of the wine barrel with the frame of the interior cabinetry under construction.

Note that we have already started the interior cabinetry…the three middle bending braces have already been removed.

Picture of barrel panels stacked and prepared for reassembly.

The panels, stacked, indexed and ready to go back on. The metal brackets are what hold the end together and will later be hidden by the end caps.

Picture of front door panel back on the barrel frame.

The front panel with the door is back on. We had to reinstall the middle ‘bending brace’ to help hold the panels as we re-installed them.

« Back - Next Page » 7

Far Star Inc. Contact Information
Telephone 303.674.0888	FAX 303.674.2367	Postal Address 5023 Hillstone Lane Evergreen, CO 80439	Electronic mail General Information: info@FarStarInc.com Sales: sales@FarStarInc.com
Copyright © 2007, 2008, 2009, 2010 Far Star Inc. Last modified: June 3, 2010